Configuring essential software

Now that all software is installed, all that we need to do to get a few programs running properly is to create their configuration files.

Configuring Vim

By default Vim runs in vi compatible mode. Some people might like this, but we have a high preference to run vim in vim mode (else we wouldn't have included Vim in this book but the original Vi). Create the /root/.vimrc by running the following:

cat > /root/.vimrc << "EOF"
" Begin /root/.vimrc

set nocompatible
set bs=2

" End /root/.vimrc
EOF

Configuring Glibc

We need to create the /etc/nsswitch.conf file. Although glibc should provide defaults when this file is missing or corrupt, its defaults don't work well with networking which will be dealt with in a later chapter. Also, our timezone needs to be set up.

Create a new file /etc/nsswitch.conf by running the following:

cat > /etc/nsswitch.conf << "EOF"
# Begin /etc/nsswitch.conf

passwd: files
group: files
shadow: files

publickey: files

hosts: files dns
networks: files

protocols: db files
services: db files
ethers: db files
rpc: db files

netgroup: db files

# End /etc/nsswitch.conf
EOF

The tzselect script has to be run and the questions regarding your timezone have to be answered. When you're done, the script will give the location of the needed timezone file.

Create the /etc/localtime symlink by running:

cd /etc &&
ln -sf ../usr/share/zoneinfo/<tzselect's output> localtime

tzselect's output can be something like EST5EDT or Canada/Eastern.

The symlink you'd create with that information would be:

ln -sf ../usr/share/zoneinfo/EST5EDT localtime

Or:

ln -sf ../usr/share/zoneinfo/Canada/Eastern localtime 

Configuring Dynamic Loader

By default, the dynamic loader (/lib/ld-linux.so.2) searches through /lib and /usr/lib for dynamic libraries that are needed by programs when you run them. However, if there are libraries in directories other than /lib and /usr/lib, you need to add them to the /etc/ld.so.conf file in order for the dynamic loader to find them. Two directories that are commonly known to contain additional libraries are /usr/local/lib and /opt/lib, so we add those directories to the dynamic loader's search path.

Create a new file /etc/ld.so.conf by running the following:

cat > /etc/ld.so.conf << "EOF"
# Begin /etc/ld.so.conf

/usr/local/lib
/opt/lib

# End /etc/ld.so.conf
EOF

Configuring Sysklogd

Create a new file /etc/syslog.conf by running the following:

cat > /etc/syslog.conf << "EOF"
# Begin /etc/syslog.conf

auth,authpriv.* -/var/log/auth.log
*.*;auth,authpriv.none -/var/log/sys.log
daemon.* -/var/log/daemon.log
kern.* -/var/log/kern.log
mail.* -/var/log/mail.log
user.* -/var/log/user.log
*.emerg *

# End /etc/syslog.conf
EOF

Configuring Shadow Password Suite

This package contains the utilities to modify user's passwords, add new users/groups, delete users/groups and more. We're not going to explain what 'password shadowing' means. All about that can be read in the doc/HOWTO file within the unpacked shadow password suite's source tree. There's one thing you should keep in mind, if you decide to use shadow support, that programs that need to verify passwords (examples are xdm, ftp daemons, pop3 daemons, etc) need to be 'shadow-compliant', e.g. they need to be able to work with shadow'ed passwords.

To enable shadow'ed passwords, run the following command:

/usr/sbin/pwconv

Configuring Sysvinit

Create a new file /etc/inittab by running the following:

cat > /etc/inittab << "EOF"
# Begin /etc/inittab

id:3:initdefault:

si::sysinit:/etc/rc.d/init.d/rc sysinit

l0:0:wait:/etc/rc.d/init.d/rc 0
l1:S1:wait:/etc/rc.d/init.d/rc 1
l2:2:wait:/etc/rc.d/init.d/rc 2
l3:3:wait:/etc/rc.d/init.d/rc 3
l4:4:wait:/etc/rc.d/init.d/rc 4
l5:5:wait:/etc/rc.d/init.d/rc 5
l6:6:wait:/etc/rc.d/init.d/rc 6

ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now

su:S016:respawn:/sbin/sulogin

1:2345:respawn:/sbin/agetty tty1 9600
2:2345:respawn:/sbin/agetty tty2 9600
3:2345:respawn:/sbin/agetty tty3 9600
4:2345:respawn:/sbin/agetty tty4 9600
5:2345:respawn:/sbin/agetty tty5 9600
6:2345:respawn:/sbin/agetty tty6 9600

# End /etc/inittab
EOF

Configuring your keyboard

Nothing is more annoying than using Linux with a wrong keymap loaded for your keyboard. If you have a default US keyboard, you can skip this section. The US keymap file is the default if you don't change it.

To set the default keymap file, create the /usr/share/kbd/keymaps/defkeymap.map.gz symlink by running the following commands:

cd /usr/share/kbd/keymaps &&
ln -s <path/to/keymap> defkeymap.map.gz

Replace <path/to/keymap> with the your keyboard's map file. For example, if you have a Dutch keyboard, you would run:

ln -s i386/qwerty/nl.map.gz defkeymap.map.gz

An second option to configure your keyboard's layout is to compile the keymap directly into the kernel. This will make sure that your keyboard always works as expected, even when you have booted into maintenance mode (by passing `init=/bin/sh' to the kernel) in which case the bootscript that normally sets up your keymap isn't run.

If you didn't create the defkeymap.map.gz file and going with the default US keymap, then again you don't have to do anything. The kernel compiles a suitable keymap by default that'll work just fine for you, so skip the next command.

Run the following commands to accomplish that:

loadkeys -m /usr/share/kbd/keymaps/defkeymap.map.gz > \
���/usr/src/linux/drivers/char/defkeymap.c

Creating the /var/run/utmp, /var/log/wtmp and /var/log/btmp files

Programs like login, shutdown, uptime and others want to read from and write to the /var/run/utmp /var/log/btmp and /var/log/wtmp. These files contain information about who is currently logged in. It also contains information on when the computer was last booted and shutdown and a record of the bad login attempts.

Create these files with their proper permissions by running the following commands:

touch /var/run/utmp /var/log/{btmp,lastlog,wtmp} && 
chmod 644 /var/run/utmp /var/log/{btmp,lastlog,wtmp}

Creating root password

Choose a password for user root and create it by running the following command:

passwd root